Manufacturing Facility Dust Collectors
custom tailored solutions for Manufacturing Facilities
Improving air quality should be a major priority for manufacturers. Metallic dust need special attention since many of them are toxic and carry extra dangers. Regulatory standards for these dust are strict—and some have recently gotten stricter—so there is no room for complacency. Fortunately, there are many ways to filter this dust out of the air and to return clean, climate-controlled air back to your manufacturing facility using air filtration systems.
Product Suggestions for the Aerospace Industry:
Benchtron BF - Cartridge Dust Collector
Benchtron Downdraft Workstation
Remove dust, fumes, and smoke at a well-lit, high suction velocity downdraft/backdraft workstation, standing or sitting, with one worksurface or two. Used to filter a broad spectrum of fine to medium-sized particulate (as well as fumes and smoke), including composites, fiberglass, metals, plastics, and wood in industries such as aircraft manufacturing and maintenance, Air Force base operations, defense contractors, cabinet manufacturing.
Downtron DFF - Cartridge Downdraft Table
Downtron DFF Series Downdraft Table
The Ultra-Efficiency Cartridge Collector Downdraft Table
Downtron DFW - Downdraft Woodworking Table
Downdraft Table for the Woodworking Industry
The Filter 1 Downtron DFW provides excellent performance for most wood sanding operations by combining our direct drive, backward-inclined wheel for efficient performance with standard MERV 11 panel filters for easy, cost-effective maintenance.
Hydrotron DHYD - Wet Type Dust Collector
Wet Type Dust Collector / Downdraft Table
The Filter 1 Hydrotron downdraft table is a self-contained workstation with its own water dust collection system, excellent for "cell manufacturing." It is used to filter Aluminum, Titanium, and other potentially explosive dust.
Hydrotron DHYD Mark II - Wet Collector Downdraft Table
Wet Collector Downdraft Table
Safely filter aluminum, titanium, and other potentially hazardous or explosive dust at a downdraft work table equipped with a water filtration system. Used for processes including sanding, grinding, deburring, buffing, polishing, packaging, and processing. Industries utilizing the Filter 1 Hydrotron DHYD include aircraft manufacturing, maintenance, repair, and overhaul operations, lighting enclosure manufacturing, Air Force base operations, motor/engine production, and major airlines.
Weldtron 2000 - Backdraft Welding Table
Backdraft Welding Table
Wet Type Environmental Control Booth
Dustron DB - Cartridge Dust Collector Booth
The Original Ultra-Efficiency Cartridge Dust Collector Booth
The Filter 1 Dustron DB Dust Containment Booth uses high suction velocity to filter various kinds of dust within a well-lit, sound-insulated workspace. The Filter 1 Dustron filters fine to medium particulate (as well as fumes and smoke) from wood, metal, composites, plastics, fiberglass, dry powder, cement and toner in a variety of industries including military, commercial aircraft manufacturing, medical equipment manufacturing, and more.
Hydrotron HPB - Water Filter Dust Collector
Water Filter Dust Collector
The Filter 1 Hydrotron Control Booth, integrating the booth enclosure and wet dust collection, is a safe and economic method of cleaning potentially volatile materials. The Filter 1 Hydrotron HPBs are generally used for working on large objects that will not fit on a table, or for multiple tabletop operations where several operators will be in the booth at the same time.
Dustron DPB - Multi-Stage Panel Filter Booth
Multi-Stage Panel Filter Booth
A versatile, easy-to-operate control booth for light to moderate loads of dust, smoke, or fumes. The Filter 1 Dustron Panel Filter Booth provides the media selection and configuration to meet or exceed OSHA requirements for fiberglass, hexavalent chromates, lead, beryllium, composites, wood, plastic, and metals.
Hydrotron HPB Mark II - Water Filter Dust Collector
Water Filter Dust Collector
"BOB" Blow Off Booth - Walk-Through Decontamination Booth
The Walk-Through Worker Cleaning and Decontamination Booth
Flowtron AC - Self Cleaning Cartridge Air Cleaners
Self Cleaning Cartridge Air Cleaners
Filter fine, airborne dust, fume, and smoke from various industrial processes including grinding, sanding, welding, soldering, mixing, finishing, and metalizing.
Flowtron ACM - Media Panel Modular Air Cleaner
Media Panel Modular Air Cleaners
Filter light to medium concentrations of fine, airborne dust, fume, and smoke from various industrial processes including grinding, sanding, welding, mixing, finishing, metalizing, and buffing.
Pulsatron PFV - Cartridge Dust Collector
Ultra-Efficiency Continuous-Duty Cartridge Dust Collector
Filters a broad range of dust particles and contaminants, such as wood dust, welding smoke, composites, plastic dust, dry powder, metal dust, toner, and cement dust. Typical applications for the Pulsatron cartridge dust collector include grinding, sanding, foundry, welding, fabrication, blasting, metalizing, and powder coating.
Pulsatron PF - Pulse Jet Dust Collector
Pulse Jet Dust Collector with a Very Small Footprint
Filter fine to medium dust, fume, and smoke from various industrial processes including grinding, sanding, welding, fabrication, blasting, metalizing, powder coating, soldering, metal fabrication, plasma arc cutting, printing, and trimming.
Bagtron BT - Baghouse Dust Collector
The 99.9% Efficient Continuous-Duty Jet Baghouse Dust Collector
Cyclotron CF - Cyclone Dust Collector
The High Efficiency Cyclone Separator / Dust Collector
Separate all moderate to large size particles, such as sawdust and metal grinding chips, for easy removal from the air stream. Used for a variety of processes including chipping, grinding, shaving/planing, bailing, printing, trimming, and cutting. Among customers using the Filter 1 Cyclotron are wood products manufacturers, major utilities, and shipping companies.
Rollatron - Portable Dust Collector
Ultra-Large Portable for the Tough Grinding & Welding Jobs
Hydrotron HWF - Wet Dust Collector
Ducted Wet Type Dust Collector for Volatile Dust
Safely capture hazardous, potentially explosive dust, such as aluminum and titanium. Used for processing including sanding, grinding, buffing, deburring, packaging, processing. The Filter 1 Hydrotron HWF dust collector is in use by major aircraft manufacturers and airlines, metal cabinet manufacturers, military base operations, medical implants, and metal enclosure manufacturers.
Mistron MF - Oil & Water Mist Collector
Low-Maintenance Collector Of Oil And Water Based Coolant Mists & Smoke Method Of Filtration
Collect oil and water-based coolant mists and smoke, providing energy efficiency, low maintenance, and long filter life. Used for machine tooling processes including wet grinding, cutting, turning, and milling. Customers utilizing the Filter 1 Mistron include heavy construction equipment manufacturers and machine shops.
Contact Our Engineers
Unsure which product is the right fit for your facility? Have a question about how we can customize our products? Fill out this form and one of our experts will respond to you as soon as possible.