Hydrotron HWF Series Dust Collector
Ducted Wet Type Dust Collector For Volatile Dust
The Filter 1 Hydrotron HWF Series dust collector is specifically designed for the capture of fine metal particles. The Filter 1 HWF series is a safe and economic method of cleaning these potentially volatile materials. With air volumes between 500 CFM and 5,000 CFM, the units can be connected via ductwork to the dust-generating machines for source capture. This water filter collector meets OSHA and NFPA regulations for dust collectors located inside the building.
Current Technology
Water Filter
Filter 1 Hydrotron wet dust collector systems purify air by a combination of centrifugal force and the violent mixing of water and contaminated air. As the airstream passes the fixed baffles, particulate is separated by a heavy, turbulent curtain of water created by a high-velocity air. The centrifugal force caused by the rapid changes in airflow direction forces the dust particles to penetrate the water droplets and become entrapped. Contaminated water is then removed from the airstream by special mist filters. Dust, as sludge, settles to the bottom and the water is reused.
Automatic Fill System
Water make up is controlled by a pressure sensor system that is unaffected by debris in the water. The system is operated by a solid-state programmable logic controller (PLC) and includes an electrical solenoid valve, isolation valve, and a manual fill/high-water sensor for reliable water control.
- Aircraft manufacture/maintenance
- Manufacture of electrical/electronic enclosures
- Milling/refining
- Chemical, rubber, or plastics
- Ceramics
- Foundries
- American Airlines
- Boeing Corporation
- Northrop Grumman
- General Electric
- Raytheon
- Pratt Whitney
- Team Rahal Racing
- U.S. Air Force
- Dupont Corporation
- Lockheed Martin
- GKN Aerospace
- Bendix Corporation
- Lithonia Lighting
- Delta Airlines
- Low maintenance operation
- Interior baffle section
- TEFC motors, single and three phase
- Direct drive/ non-overloading fan
- Mist eliminator filters
- Electronic water level control with PLC pressure sensor system
- Sump with sloped sides for easy clean-out
- Removable clear plastic panel door for inspection and clean-out
- 2" drain
- Magnehelic gauge
- Construction: galvanized steel with coal tar epoxy coatings to interior wet surfaces
- Industrial blue enamel finish on exterior
- Stainless steel construction
- Overflow/low water alarms
- Overflow/low water cut-off and alarms operated by PLC
- Explosion proof motors
- Drag-type sludge conveyors
- High-pressure blowers
- HEPA safety filters
- Auxiliary switches
- Custom paint color
Wet Dust Collector - Hydrotron HWF Series Dust Collector Series
| Model | CFM | HP | HxWxL | Water Gal |
| HWF1-10-3 | 1000 @ 4" HSP | 3 | 95"x34"x40" | 50 |
| HWF2-20-3 | 2000 @ 4" HSP | 3 | 95"x34"x40" | 63 |
| HWF3-30-5 | 3000 @ 4" HSP | 5 | 95"x36"x46" | 93 |
| HWF4-40-7.5 | 4000 @ 4" HSP | 7.5 | 95"x40"x48" | 100 |
| HWF5-50-10 | 5000 @ 4" HSP | 10 | 95"x46"x58" | 100 |
Contact Our Engineers
Unsure which product is the right fit for your facility? Have a question about how we can customize our products? Fill out this form and one of our experts will respond to you as soon as possible.