Hydrotron DHYD Downdraft Table
Wet Type Dust Collector / Downdraft Table
Filtering Aluminum, Titanium, and Other Potentially Explosive Dust
The Filter 1 Hydrotron DHYD Downdraft Table is a self-contained workstation with its own water dust collection system, excellent for "cell manufacturing." It features easy installation and comes ready to run. The workstation is available with a single work surface or with two work surfaces, one on each side.
The Hydrotron gets the dust immediately wetted, reducing the risk of fire in ductwork, and meets OSHA and NFPA regulations for dust collectors located inside the building. The standard unit includes a fiberglass grated work surface, a Regain Air Curtain in front to prevent dust from escaping the work zone, and a clear inspection door.
Water Filter Technology
Filter 1 Hydrotron Water Filter Dust Collectors purify the air by a combination of centrifugal force and violent mixing of water and contaminated air. As the airstream passes the fixed baffles, particulate is separated by a heavy, turbulent curtain of water created by high-velocity air. The centrifugal force caused by the rapid changes in airflow direction forces the dust particles to penetrate the water droplets and become entrapped. Contaminated water is then removed from the airstream by special mist filters. Dust, as sludge, settles to the collector's bottom and the water is reused.
The wet collector with a single and dual workstation is specifically designed for the safe collection of potentially explosive and volatile materials and is effective in the capture of fine metal particles. It meets the National Fire Protection Association (NFPA) guidelines for processing and finishing aluminum. (Learn more about NFPA guidelines and the use of wet dust collectors). Since the Hydrotron also meets OSHA and NFPA regulations for dust removal located inside buildings, it can recirculate in-plant, tempered air to conserve energy.
- Sanding, grinding, deburring, polishing, packaging, and processing
- Aircraft maintenance, repair, and overhaul operations
- Electrical, communication, and lighting enclosure manufacturers
- Milling
- Refining
- Ceramics
- Foundries
- Chemicals
- Rubber products
- Plastics
- Regain air system
- Stainless steel construction
- Overflow/low water cut-off switches
- Explosion-proof motors
- HEPA safety filters with alarms
- Automatic vent fans
- Additional contacts
- Front access for clean-out
- The unit may be placed against the wall (conserving floor space)
- TEFC motors, single and three-phase
- Direct drive/non-overloading fan
- Interior baffle section
- Special mist filters
- Low maintenance
- Solid-state PLC electronic water level control by fan pressure
- Galvanized steel construction with two-part cold tar epoxy coatings to all interior wet surfaces
- Industrial enamel "Gulf Blue" coating on the exterior
- Magnehelic gauge
- Automatic fill system
- Electrical solenoid only allows makeup water to enter the unit when the blower is on.
- An automatic electronic float valve controls the level of water when the unit is running.
- Cut-off valve isolates unit for service
- Pressure regulator
- Manual fill override switch for initial filling of water
- Magnetic motor starter with push-button on/off and overload protection
- Clear containment enclosure provides contaminant control
- Booth is available as a single or double (back-to-back) workstation
- Optional “Push-Pull” regain air system enhances worker comfort and visibility
- Wetting of volatile dust and heavy sparks eliminates fire risk
- Meets OSHA and NFPA regulations for dust removal within the building
- No expensive filters to replace
- Re-circulates filtered air for savings on cooling and heating costs
- Automatic fill system utilizes a pressure sensor system for reliability unaffected by debris in the water
- Custom features and sizing are available
- American Airlines
- Boeing Corporation
- Northrup Grumman
- General Electric
- Raytheon
- Pratt Whitney
- Team Rahal Racing
- U.S. Air Force
- DuPont
- Lockheed Martin
- GKN Aerospace
- Bendix Corporation
- Lithonia Lighting
- Delta Airlines
Wet Collector With Single & Dual Workstation - Hydrotron DHYD Downdraft Table Single Station
| Model | CFM | HP | Table DxW |
| DHYD1-30-5-4 | 3000 | 5 | 1x30"x48" |
| DHYD1-30-5-3 | 3000 | 5 | 1x30"x36" |
| DHYD1-30-5-4-3 | 3000 | 5 | 1x36"x48" |
| DHYD1-30-5-5 | 3000 | 5 | 1x30"x60" |
| DHYD1-30-5-6 | 3000 | 5 | 1x30"x72" |
| DHYD1-50-10-4 | 5000 | 10 | 1x30"x48" |
| DHYD1-50-10-4-3 | 5000 | 10 | 1x36"x48" |
| DHYD1-50-10-5-3 | 5000 | 10 | 1x36"x60" |
| DHYD1-50-10-6-3 | 5000 | 10 | 1x36"x72" |
Wet Collector With Single & Dual Workstation - Hydrotron DHYD Downdraft Table Double Station
| Model | CFM | HP | Table DxW |
| DHYD2-30-5-4 | 3000 | 5 | 2x30"x48" |
| DHYD2-50-10-5-3 | 5000 | 10 | 2x36"x60" |
| DHYD2-50-10-5 | 5000 | 10 | 2x30"x60" |
| DHYD2-50-10-4 | 5000 | 10 | 2x30"x48" |
| DHYD2-50-10-4-3 | 5000 | 10 | 2x36"x48" |
| DHYD2-50-10-5-3 | 5000 | 10 | 2x36"x60" |
| DHYD2-50-10-6 | 5000 | 10 | 2x30"x72" |
Hyrdrotron Tables Eliminate Fires and Provide Comfort
Contact Our Engineers
Unsure which product is the right fit for your facility? Have a question about how we can customize our products? Fill out this form and one of our experts will respond to you as soon as possible.